Refolk
November 15, 2026·9 min read

Innoviz Cut 80. The 90 Who Left Before Them Know Who's Still There

Innoviz's 2026 layoff is its third in three years. Here's how to use 2024-25 alumni to map the remaining lidar team and tell automotive staff from Perciz.

Innoviz layoffsInnoviz layoff 2026hire lidar engineerslidar perception engineer Israelrecruit laid off engineers from previous layoff rounds
Innoviz Cut 80. The 90 Who Left Before Them Know Who's Still There

If you want to hire lidar engineers out of Innoviz's November 2026 layoff, the 80 people leaving now aren't your best source of information. The 90 to 100 who left in the 2024 and 2025 rounds are, because they know which teams survived and who is still on them.

This is Innoviz's third cut in three years. It removes roughly 20% of the company and takes reported headcount below 300. The useful work is mapping who remains and separating the automotive staff who are exposed from the Perciz staff management is investing in.

What did Innoviz announce in November 2026?

Innoviz is laying off about 80 employees, around 20% of its workforce, after a vehicle launch using its sensors slipped by a year and pushed back payments the company had been counting on. Calcalist reported the cut. The company says it will save about $17.5 million a year and stretch its liquidity into 2028.

  • Liquidity: $54.4 million at the end of September 2026.
  • Q3 2026 revenue: $12.1 million. That's down from $15.3 million a year earlier and well under the $21.33 million analysts expected.
  • Guidance: full-year 2026 revenue now $44 to $46 million. New NRE payment plans now $20 to $30 million.
  • Market cap: about $65 million. The SPAC valued the company at $1.4 billion.

Calcalist doesn't say which customer delayed. A JPMorgan downgrade headline linked the weakness to delays at Volkswagen. Don't name a customer in your outreach until someone inside confirms it.

The mechanism matters more than the name. NRE (non-recurring engineering) is engineering work a customer pays for before series production. When the launch slips a year, the payments slip with it, and the engineers those payments were funding become the obvious cost to cut. That's the group to look at first.

Why are the 2024 and 2025 alumni the best map of the team?

The people Innoviz let go in 2024 and 2025 are about as many as the people leaving now, and each earlier round hit specific teams. Ask an alumnus which teams survived and they can usually name the people on them. Nobody else outside the company can do that.

RoundApprox. people cutWhat drove it
2024~60 of 468InnovizOne moved to series production. Money shifted to InnovizTwo and perception software
2025~30 to 40 (about 9%)Mostly development teams on products with "limited economic potential"
Nov 2026~80 (about 20%)Automotive launch pushed back a year, payments delayed

What the 2024 round took

In 2024 the company employed 468 people. Most worked at headquarters in Rosh Ha'ayin, with smaller groups in Europe and the U.S. About 60 left. Innoviz said the savings came from moving InnovizOne into series production and putting future investment into the InnovizTwo sensor and its perception software. So the 2024 leavers lean toward InnovizOne. They saw the InnovizTwo team take shape and can tell you who moved over.

What the 2025 round took

Calcalist put the 2025 cut at about 40 people, and Times of Israel said 30. Calcalist reported that most came from development teams working on products management saw as having limited economic potential. These leavers know which development teams were judged worth keeping, which is the same question the company has now had to answer again.

Alumni owe the company nothing and most still talk to former teammates. Their view of the org chart is a year or two out of date, which is still far better than a guess from job titles. They're also a natural warm introduction: "your old lead asked me to reach out" gets a reply where a cold InMail won't.

170-180
People laid off by Innoviz since January 2024
Out of a 2024 headcount of 468, across three rounds in three years.

Does the headcount actually add up?

Innoviz's reported headcount of "fewer than 300" doesn't reconcile cleanly with the 20% figure, so treat it as an estimate and confirm it with alumni before you plan outreach. If 80 people is exactly 20%, the starting base was about 400 and about 320 remain. Subtract all three rounds from 468 and you get roughly 290 to 300.

The gap is 20 to 30 people. Here's why it matters:

  1. Rounding. "About 20%" and "about 80" are both rounded numbers, so some of the gap may be arithmetic.
  2. Quiet exits. People who resigned and weren't replaced don't show up in any layoff count. They might still be open to a call.
  3. Sizing your pipeline. If your plan assumes 320 people remain and the real number is 290, you're overestimating how many are left to approach.

Ask two or three alumni one question: how many people sit on the team you used to work with today, compared with when you left? Their answers will tell you more than the press release does.

Who is at risk: automotive programs or Perciz?

Innoviz's automotive program staff are more exposed than its Perciz staff, because the cut follows a delayed automotive launch while management is putting its story and investment into Perciz, the defense and homeland security business. Management's Q3 framing is that Innoviz is now built around "two synergistic end-markets: automotive, and defense and homeland security under our Perciz brand."

Perciz is still small, about 6 to 7% of revenue, but it's moving fast:

  • Partnerships: six announcements in three months across counter-UAS and perimeter security, according to the Q2 2026 report.
  • Orders: its first multimillion-dollar defense orders.
  • Validation: in September, MAFAT (Israel's Directorate of Defense Research and Development) recognized the maturity, robustness, and performance of Innoviz's lidar.

Production is shifting too. In July 2025, the first InnovizTwo units shipped from Fabrinet's high-volume line. Once a contract manufacturer is running volume, in-house production roles are hard to justify. I'm inferring this, so check it with alumni. Still, the roles most likely to be cut are automotive program, NRE delivery, and in-house production.

Perciz sells the same sensor. A job title can't tell you which side of the business an engineer is on.

Why profiles won't tell you

Perciz sells the same lidar platform that BMW, Volkswagen, Mobileye, and Daimler Truck picked. An optics engineer on InnovizTwo could be supporting an automaker or an Israeli counter-UAS integrator, and the title "Optical Engineer, Innoviz" looks the same either way.

Signals someone works on the automotive side

  • Mentions of automotive customers such as BMW, Volkswagen, or Daimler Truck, or of series production.
  • Program management, customer engineering, or NRE delivery roles.
  • Production, test, or manufacturing engineering in Rosh Ha'ayin.

Signals someone works on Perciz

  • Counter-UAS, perimeter security, or homeland security in the role description.
  • Integrator partnerships or customer-facing defense work.
  • Previous jobs at ELTA Systems or Elbit Systems. Both already turn up in the Israeli perception engineer pool.

How big is the Israeli lidar talent pool?

The Israeli lidar pool is small, and searching profile headlines alone misses more than half of it. In Refolk's index, 91 Israel-based people have "lidar" in their headline and 199 list LiDAR as a skill, about 2.2 with the skill for every one who puts it in their headline.

Query (Israel only)ProfilesTop employers (sample of up to 25)
"lidar" in headline91Innoviz 6, Mobileye 4, Intel 3
LiDAR listed as a skill199Apple 4, Avride 2
"perception engineer" in headline23Percepto 10, ELTA 2, Mobileye 2, Elbit 1
Innoviz cuts 2024 / 2025 / 2026~60 / ~30-40 / 80Press reports

The first three rows come from Refolk's index. The last row comes from Calcalist and Times of Israel.

91
Israel-based profiles with "lidar" in the headline
Innoviz is the top current employer in the sample, at 24%.

Three things stand out:

  • Innoviz dominates the headline group. It accounts for 6 of the 25 sampled. Titles include "LIDAR System Architecture team leader" and "Chief Architect of RealSense Lidar Camera."
  • The skill-only group is senior. Its top titles lean toward co-founder, CTO, and CPO, and Apple is its biggest employer. Senior people tend to headline a title rather than a technology, so a headline search skips them.
  • "Perception engineer" pulls in a company name. Percepto makes up 10 of the 23 results, or 43%, because its name matches the keyword. That's noise.

Keyword search can't handle any of this. You need to say "optics or perception engineer at Innoviz, any title, worked on InnovizTwo, not Percepto," and a keyword tool doesn't know Percepto is a company or that "System Architecture team leader" means lidar. That's the gap Refolk fills. You describe the person in plain English, and it reads the whole profile, not only the headline.

How do you recruit laid off engineers from previous layoff rounds?

Start with the alumni, not the people just cut. Use them to map the remaining team and pick out automotive-side staff, then approach those people with a warm introduction. Here's the sequence I'd follow:

  1. Build the alumni list. Find profiles where Innoviz tenure ended between mid-2024 and late 2025. Separate InnovizOne-era leavers from 2025 development leavers. Doing this by hand means reading end dates on every profile. With Refolk you can ask for "people whose Innoviz role ended in 2024 or 2025, grouped by team."
  2. Interview three to five alumni. Ask which teams survived, roughly how big they are, who leads them, and which ones were funded by automotive NRE.
  3. Sort the current staff. Mark each person as automotive program, Perciz, platform (sensor, optics, perception software), or production. Use the signals above.
  4. Prioritize. Approach automotive program, NRE, and in-house production staff first. Approach platform engineers next, since both businesses use them. Leave Perciz staff for last unless your role is in defense.
  5. Ask for the introduction. Ask each alumnus to introduce you to one or two former teammates. Say plainly that you know about the cut and you aren't asking anyone to break confidence.

Write to each group differently. Automotive staff respond to stability and a product that ships. Perciz staff respond to defense programs. Platform engineers respond to hard optics and perception problems. Whatever the group, mention the alumnus who referred you.

On non-competes, Innoviz's FY2024 20-F says it uses them but concedes they "may not help us retain employees." Don't let a non-compete put you off a candidate. Get legal to review the specific agreement before anyone signs an offer.

If you're hiring outside Israel, the wider perception market gives you a benchmark for what these engineers might be offered elsewhere.

The hard part is the scale. You're working with 91 headline profiles and 199 skill-only profiles, checking them against alumni tenure, and clearing a non-compete question on every finalist. Done by hand, that takes weeks, and the best people at Innoviz will have heard from Mobileye and ELTA before you've finished. If the role has been open for a quarter and an agency is quoting a full search fee, there's another option.

FAQ

How many people has Innoviz laid off since 2024?

About 170 to 180. Around 60 left in 2024 out of 468 employees, about 30 to 40 left in 2025, and about 80 are leaving in the November 2026 round. Headcount is now reported below 300, though the arithmetic suggests that number could be off by 20 or 30 people.

Is Perciz being cut too?

Management is positioning Perciz, the defense and homeland security brand, as a growth business. It has six partnership announcements, its first multimillion-dollar defense orders, and MAFAT recognition. The cut follows an automotive launch delay, so automotive program staff are more exposed. Perciz uses the same sensors, though, so confirm which side someone works on with alumni or by asking them.

Where do lidar perception engineers in Israel work besides Innoviz?

In Refolk's index, Mobileye and Intel follow Innoviz among people with "lidar" in their headline, and Apple and Avride lead among people who list it as a skill. ELTA Systems and Elbit Systems show up in the perception engineer pool and compete with Perciz for that talent. Mobileye is an Innoviz customer but also cut 200 people in December 2025, so it isn't an automatic landing spot for anyone leaving.

Should I wait for the laid-off engineers to post that they're looking?

No. Many won't post, and quiet exits never show up in any layoff count. Map the team through 2024 and 2025 alumni now, approach automotive-side staff with a warm introduction, and get there before Mobileye, ELTA, and Elbit do.

The data behind this

Try it on the search you came here for

Stop building boolean strings. Just describe the person.

Type one sentence. I plan the search, read GitHub, public LinkedIn and Crunchbase records, and the open web as it is right now, and hand back a ranked list with the reason next to every name.

  1. 01Describe them

    One plain sentence. Role, city, stack, stage, whatever matters to you.

  2. 02I read the web live

    GitHub, public LinkedIn and Crunchbase records, the open web. Not a database that went stale last quarter.

  3. 03You read the shortlist

    Ranked, with the reasoning under every name. Open a profile, ask a follow-up, narrow it down.

  • No boolean, no filters, no seat to buy. One box.
  • Read at search time, so a profile updated yesterday counts today.
  • Every step visible as it runs, every name with its reason.

500 free credits on sign-up. No card, no demo call. See real searches.

Read next