Senior Hardware Developer - Electronics Prototyping & EMC
Avidbots · Kitchener, Ontario
- Location
- Kitchener, Ontario, Canada
- Employment
- Full time
- Level
- Senior
- Posted
- 25 September
About this role
About Avidbots
Avidbots is a robotics company with a vision to bring robots into everyday life to expand human potential. Headquartered in Kitchener, ON, we support customers on five continents. Our flagship products, the Neo and Kas autonomous floor scrubbing robots, are deployed worldwide and trusted by leading facilities and building service companies.
The Role
We're looking for a senior hardware developer who builds to think. This role sits in Research & Development, ahead of but supporting the production program, and its job is to turn open questions about our next generation of floor scrubbing robots into working hardware fast enough to answer them.
You'll take ideas from whiteboard to bench article in weeks dev kits, breadboards, quick-turn boards you lay out yourself and assemble in our lab, then instrument them, break them, and produce a defensible recommendation. Some of what you build will be thrown away on purpose. The parts that survive become the basis of what the production team inherits.
The specialization we need most is electromagnetic compatibility. A mobile robot puts high-current motor drives, switching converters, sensitive sensor front ends, radios, and LiDAR inside one steel frame, and EMC problems discovered late are expensive. We want them found on the prototype, on the bench, by someone who designed for them in the first place.
Key Responsibilities
Prototyping and bring-up
- Turn concepts into working hardware quickly, evaluation kits, breadboards, and quick-turn PCBs, hand-assembled and reworked in house.
- Own bring-up and debug end to end, on iteration cycles measured in weeks rather than quarters.
- Design and build the test jigs, fixtures, and instrumented benches that make results trustworthy.
- Run trade studies and bench experiments that settle architecture questions with measured data instead of opinion.
- Judge when a prototype is good enough to make the decision, and say so when it isn't.
Board and system design
- Own schematic capture and multilayer PCB layout across analog, digital, and power domains: control boards, sensor interfaces, power distribution, safety circuits, and motor control units.
- Contribute to system architecture and power distribution strategy for the next-generation platform.
- Work the whole range of the problem, architecture, embedded and analog design, detailed layout, debug, and board- and system-level testing.
EMC, EMI, and signal integrity
- Design for EMC from the first revision: stackup and impedance planning, ground and return-path strategy, partitioning of noisy and quiet domains, filtering, transient suppression, and shielding.
- Design the power architecture for low emissions, converter selection and layout, switching-node containment, common-mode choke and filter design, and control of motor-drive noise coupling into sensor and communication buses.
- Stand up and run in-house pre-compliance screening on prototypes: near-field probing, conducted and radiated emissions, ESD, EFT, and surge immunity. Diagnose findings down to the offending trace, cable, or component.
- Support external test-house campaigns, plan, attend, triage failures, and drive the mitigation and re-spin.
- Partner with the mechanical team on harness and enclosure design: routing, segregation, shield termination, bonding, connector selection, and grounding of the chassis and drivetrain.
Sensors and evaluation
- Evaluate, select, and characterize sensor suites and mechatronics - 2D/3D LiDAR, Time-of-Flight sensors, drive encoders, and failsafe brakes - including head-to-head evaluation against real operating conditions.
- Prototype new hardware features, from first concept through demonstrable bench and robot-level function.
Safety and path to production
- Design with IEC 61508, IEC 63327, and IEC 60335-2-72 in view from the prototype stage, so architecture choices don't foreclose certification later.
- Contribute to Hazard Analysis & Risk Assessment, FMEA, and FMEDA work alongside the functional safety lead.
- Hand designs over cleanly: DFM feedback, BOM and second-source strategy, and the design intent the production and V&V teams need to carry it forward.
Knowledge stewardship
- Document the reasoning, not just the result. Capture what was tried and rejected, which component choices are load-bearing, and where the known failure signatures live, so the lessons of a prototype outlive the prototype itself.
Requirements
- B.Sc. in Electrical Engineering or equivalent.
- 7+ years of hardware design experience in a relevant field - robotics, safety-critical, medical, aerospace, or automotive.
- Excellent schematic and multilayer PCB layout skills, including mixed-signal and power layout. You should be able to defend a stackup, a ground scheme, and a return path.
- Demonstrated ownership of a product through EMC certification - you have taken a design into a chamber, failed, root-caused it, fixed it, and passed. Familiarity with the applicable emissions and immunity families (e.g. CISPR/EN 55014 or CISPR 11, the IEC 61000-4 immunity series, FCC Part 15 Subpart B, ICES-003).
- Genuinely hands-on in the lab: comfortable assembling and reworking your own boards, including fine-pitch and BGA rework, and building fixtures to get a measurement you trust.
- Proficient with standard lab instrumentation - DMM, oscilloscope, power supply, function generator - plus spectrum analyzer and near-field probes.
- Comfortable working from incomplete requirements. You can scope a prototype to answer one question, resist gold-plating it, and change direction when the data says to.
- Experience across the full development cycle, and a history of designs that shipped and held up in the field. Prototyping here is the front end of a real product, not a lab exercise.
- Working knowledge of functional safety standards and hardware safety integrity metrics.
- Strong critical thinking, problem-solving, and organizational skills. A self-starter who is genuinely interested in robots.
Bonus Qualifications
- Hands-on EMC troubleshooting depth: filter design, ferrite and choke selection, shielded cable termination, and closing out failed scans under schedule pressure.
- Experience with high-current brushless motor drives and their noise behaviour in a mobile platform.
- Experience with electronics design and simulation tools - Altium, or comparable SI/PI simulation.
- Enough embedded or scripting ability to bring up your own prototype without waiting on a firmware queue - C, Python, or similar.
- Exposure to rapid mechanical fabrication for prototype enclosures and brackets: 3D printing, laser cutting, basic machining.
- Standards and certification experience (UL, CSA, CE, and similar), including preparing technical files.
- Experience with robots or complex electro-mechanical systems, and with safety-critical hardware.
- Familiarity with laser product safety (IEC 60825) or intentional-radiator certification for embedded radios.
- Familiarity with ROS, Linux-based operating systems, Jira, and Google Workspace.
- Previous experience operating or servicing industrial or commercial floor cleaning equipment.
**We use artificial intelligence technology to assist in reviewing and screening applications for this position.
As published by Avidbots. Applications are handled on their site.
Skills this posting mentions
About Avidbots
Our vision is to expand humanity’s potential through robotics and automation. We design and build autonomous cleaning technology that empowers organizations and their workers to become more productive and efficient versions of themselves. Our robots - Neo, Neo 2W, and Kas - help raise and maintain cleanliness standards in commercial and industrial facilities without higher costs or tougher demands on teams. Our newest innovation, Kas, opens new possibilities for busy commercial environments thanks to improved performance in tight spaces, a focus on safety, and a futuristic design that enhances its surroundings. Retail, healthcare, education, transportation, and more, Kas continues Avidbots’ record of creating tailor-made solutions for its customers, so organizations can reach their full potential.
All 12 openings at AvidbotsOne click, then it is written
Apply to Avidbots with a resume written for this role.
Queue Senior Hardware Developer - Electronics Prototyping & EMC and I read the posting, rewrite your resume against it, draft the cover letter, and score the fit. Then you press send, or press one button and I fill in Avidbots’s form for you.
01Drop your resume
A PDF or a LinkedIn URL. About a minute, once.
02I rank the openings
Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.
03Each one is written up
Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.
- 25 sent a week, free
- No card
- Nothing sent until you say so
More roles at Avidbots
See all- 12 November
- 7 October
- 8 September
- 12 June
- 16 April
- 9 April
Similar roles elsewhere
See more- 7 October
Put this to work
Paste your career in once. Every application after that is written for you.
Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.
01Drop your resume
A PDF or a LinkedIn URL. About a minute, once.
02I rank the openings
Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.
03Each one is written up
Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.
- New matches ranked and written before you are up.
- Every bullet stays inside what your history supports. Nothing invented.
- Queued, submitted, interviewing, offer: one screen, not a spreadsheet.
Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.
Listed from the job board Avidbots publishes. Refolk is not the employer and does not handle their hiring. Applications go to Avidbots directly.
Hiring at Avidbots? Post this role to the Refolk talent pool for $299, once. No commission, refunded if I find nobody. Post a role for $299