Refolk
Open nowEngineering

ATE Software Engineer

DRIVENETS · Raanana, Israel

Location
Raanana, Israel
Employment
Full time
Level
Mid level
Posted
8 September

About this role

About DriveNets

DriveNets is a leader in high-scale networking software for AI infrastructure and service providers. The company pioneered a disaggregated networking architecture that transforms the economics of large-scale networks while maximizing performance, utilization, and operational efficiency. DriveNets-powered networks are deployed by global leaders, including AT&T and Comcast, supporting more than 30% of total U.S. internet traffic. DriveNets AI Fabric delivers full-stack networking for AI infrastructures, providing the highest-performance, Ethernet-based alternative to InfiniBand. The solution is deployed by hyperscalers, NeoClouds, and enterprises worldwide. With over $1B raised, DriveNets continues to push the boundaries of modern networking infrastructure.

About the Role

We are seeking a senior ATE Software Engineer to design, build, and deploy our next-generation automated manufacturing test platform for advanced telecom, high-density switching, and optical networking hardware.

In this role, you will bridge the gap between R&D hardware/firmware teams and high-volume manufacturing lines. You will take ownership of ingesting, refactoring, and consolidating disparate R&D scripts, diagnostic tools, and legacy software into a single, scalable, production-grade test platform.

We expect you to leverage modern AI-assisted development tools and workflows to maximize engineering efficiency, accelerate delivery timelines, and build highly robust, self-healing test automation. You will deploy test stations across global Contract Manufacturers (EMS/ODM), actively stabilize production lines through bring-up and ramp-up, and drive continuous test maintenance and root-cause failure analysis (RCA).

Key Responsibilities

  • Test Platform Architecture & Software Development:

Design, develop, and productize robust, modular test software frameworks for board-level (PCBA) and system-level manufacturing testing across multiple product lines and manufacturing sites.

  • Codebase Unification & Refactoring:

Consolidate and standardize R&D diagnostic libraries, silicon validation scripts, and firmware tools developed across various environments (Python, C# / Visual Studio, VB, ATEasy, Linux) into a unified, maintainable test execution engine.

  • AI-Accelerated Development & Workflow Automation:

Actively integrate Generative AI tools and AI coding agents into your daily workflow to accelerate code conversion/refactoring, automate test case synthesis, generate edge-case validation scripts, and enhance overall codebase resilience.

  • Production Line Deployment & Stabilization:

Deploy test stations and fixtures to local and overseas EMS/CM production lines. Monitor, debug, and fine-tune test execution during NPI and ramp-up phases until yield, takt time, and test stability targets (CPK / First Pass Yield) are achieved.

  • Failure Investigation & Intelligent RCA:

Investigate complex system-level and component-level test failures. Utilize advanced log analysis, structured telemetry, and pattern recognition to drive root-cause investigations and implement preventive software/hardware fixes.

  • Ongoing Test Maintenance & Optimization:

Provide continuous operational Production line support and maintenance, bug fixes, software updates, and station cycle-time optimizations for active mass-production lines.

  • R&D Collaboration & Test Specification:

Collaborate closely with Hardware, Firmware, and Validation teams during early design phases to define test specifications, drive Design for Testability,

  • Documentation & Technical Reporting:

Author and maintain comprehensive testing documentation, Standard Operating Procedures (SOPs), test coverage matrices, and detailed failure analysis reports.

  • Manufacturing Systems Integration:

Integrate automated test sequences with CM’s SFC/MES/QMS, serialized tracking, and central test log databases.

  • Log Analysis & Analytics Tool Development:

Design and build dedicated log parsing, data visualization, and diagnostic analytics tools to streamline complex hardware/software debugging, accelerate root-cause analysis (RCA), and drive continuous production line cycle-time and yield optimization.

Requirements

  • B.Sc. in Electrical Engineering, Software Engineering, Computer Science, or equivalent practical experience.
  • 5+ years of hands-on experience in ATE software development and production test engineering for complex telecom, networking, or optical hardware products.
  • Advanced, everyday practical mastery of AI-assisted engineering tools (e.g., GitHub Copilot, Cursor, LLM-based coding agents, automated prompt-driven refactoring) to radically accelerate code delivery, debug legacy systems, and enforce code quality.
  • Strong software engineering skills in Python and Linux environments.
  • Practical experience with test development in C# (.NET / Visual Studio), VB, or specialized test sequencers such as ATEasy.
  • Proven track record of deploying, commissioning, and stabilizing ATE test benches at overseas tier-1 EMS/CM facilities.
  • Strong grasp of digital and communication protocols (PCIe, I2C, SPI, MDIO, UART, Ethernet) and familiarity with lab equipment (oscilloscopes, power supplies, high-speed traffic generators).
  • Strong analytical and debugging skills to isolate issues between hardware defects, firmware bugs, test software, and fixture/cabling failures.
  • Experience writing clear engineering documentation, test procedures (SOPs), and technical root-cause reports.
  • Excellent verbal and written English communication skills; readiness to support global manufacturing sites (including occasional international travel for line bring-up).
  • Proven hands-on experience integrating ATE platforms and automated test tools with Contract Manufacturers MES, QMS, and Shop Floor Control (SFC) systems for automated serialization, unit routing, and quality data logging.

Preferred Qualifications

  • Experience with high-density Ethernet switches, data center networking architectures.
  • Hands-on experience testing high-speed optical transceivers and SerDes interfaces.
  • Strong advantage: Practical knowledge of high-speed SerDes configuration, link-tuning, and signal integrity validation.
  • Experience implementing AI/ML-driven log parsers, anomaly detection, or predictive yield analytics for manufacturing telemetry.
  • Experience integrating JTAG / Boundary Scan tools (JTAG Tech’) into automated manufacturing flows.
  • Familiarity with database architectures (SQL), data analytics, and SPC for production yield monitoring.

As published by DRIVENETS. Applications are handled on their site.

Skills this posting mentions

Failure AnalysisUARTODM

About DRIVENETS

DriveNets is a rapidly growing software company that has created a radical new way for service providers and hyperscalers to build their networking infrastructure. DriveNets Network Cloud and DriveNets Network Cloud-AI are new innovative networking solutions that apply the cloud architectural approach to high-scale networking. They bring together the scalability of standard Ethernet Clos architecture with the high performance and reliability of service provider networking, delivering optimal networking performance, scale and cost structure for service providers and hyperscalers. Founded by Ido Susan and Hillel Kobrinsky, two successful telco entrepreneurs, DriveNets Network Cloud is the leading open disaggregated networking solution based on cloud-native software running over standard white boxes. Over three funding rounds, DriveNets raised $587 million. Its solutions are used by tens of service providers globally and are in proof-of-concept and lab trials at dozens of operators and hyperscalers, consistently ranking #1 in trials for breadth of capabilities and solution quality. AT&T, the largest backbone in the US, deployed DriveNets Network Cloud across its core network, and DriveNets is currently transporting more than 52% of AT&T’s core network traffic. DriveNets is engaged with over 100 Tier-1 operators and cloud-providers on large projects in North America, Asia and Europe.

All 51 openings at DRIVENETS

One click, then it is written

Apply to DRIVENETS with a resume written for this role.

Queue ATE Software Engineer and I read the posting, rewrite your resume against it, draft the cover letter, and score the fit. Then you press send, or press one button and I fill in DRIVENETS’s form for you.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • 25 sent a week, free
  • No card
  • Nothing sent until you say so

More roles at DRIVENETS

See all

Similar roles elsewhere

See more

Put this to work

Paste your career in once. Every application after that is written for you.

Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • New matches ranked and written before you are up.
  • Every bullet stays inside what your history supports. Nothing invented.
  • Queued, submitted, interviewing, offer: one screen, not a spreadsheet.

Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.

Listed from the job board DRIVENETS publishes. Refolk is not the employer and does not handle their hiring. Applications go to DRIVENETS directly.

Hiring at DRIVENETS? Post this role to the Refolk talent pool for $299, once. No commission, refunded if I find nobody. Post a role for $299