Refolk
Open nowEngineeringEngineering

Sr. Electrical Engineer - Robotics Hardware

Dexterity · Redwood City, CA

Location
Redwood City, CA
Level
Senior
Posted
13 November

About this role

ABOUT THE ROLE

Dexterity is seeking a Senior Electrical Engineer to join our lean, hands-on Electrical Hardware team responsible for the electrical architecture, design, and integration of Mech, our mobile robotic platform.

In this role, you will design PCBAs, electrical systems, and wiring harnesses, taking hardware from initial concept through prototyping, validation, and production. You will be directly involved in bringing up new hardware, troubleshooting complex electrical issues, and supporting systems in the lab, on the manufacturing floor, and in the field.

You will work alongside experienced electrical engineers in a highly collaborative environment where engineers take ownership of their designs and remain closely involved throughout the product lifecycle. This is an opportunity to make meaningful technical contributions to a sophisticated robotic system while staying deeply engaged in hands-on engineering.

WHAT YOU WILL DO

  • Design and develop PCBAs for power distribution, DC-DC conversion, control, and system interfaces, from schematic capture through layout review and validation.
  • Develop and maintain system-level electrical schematics, wiring diagrams, power distribution architecture, and grounding strategies.
  • Design and integrate wiring harnesses, including connector selection, pin assignments, wire sizing, routing, and coordination with mechanical CAD and harness manufacturing partners.
  • Develop and execute hardware bring-up and design verification testing (DVT), including test plans, acceptance criteria, fixtures, and test setups.
  • Perform hands-on electrical debugging using oscilloscopes, DMMs, LCR meters, power supplies, electronic loads, and other laboratory equipment.
  • Investigate and resolve electrical issues encountered during development, manufacturing, and field deployment, driving root-cause analysis and implementing corrective actions.
  • Select and qualify electrical components, maintain accurate bills of materials (BOMs), and support supplier engagement and manufacturing readiness.
  • Support contract manufacturers through prototype and production builds, including engineering change orders (ECOs), manufacturing documentation, and production test and inspection requirements.
  • Collaborate closely with mechanical, controls/firmware, manufacturing, compliance, and field service teams to ensure robust system integration and product reliability.
  • Apply sound engineering practices for electrical safety, EMC, thermal performance, and long-term reliability throughout the design and validation process.

WHAT YOU WILL BRING

  • Bachelor's degree in Electrical Engineering or equivalent practical experience.
  • 7+ years of experience designing electrical hardware for complex electromechanical systems, such as robotics, electric vehicles, industrial automation, or similar products.
  • Strong PCBA schematic design and layout experience, preferably with Altium Designer, including design for manufacturability (DFM) and design for testability (DFT).
  • Practical experience with power electronics, including DC-DC converters, high-current power distribution, MOSFET and contactor switching, pre-charge circuits, and electrical protection.
  • Experience designing and integrating wiring harnesses for demanding environments involving vibration, mechanical movement, and high reliability requirements.
  • Excellent hands-on troubleshooting skills, with a systematic, data-driven approach to debugging and root-cause analysis.
  • Demonstrated experience taking electrical hardware from prototype through design verification and into production, including collaboration with contract manufacturers.
  • Strong technical documentation and communication skills, including design documentation, test plans, and failure analysis reports.
  • Ability to work independently, exercise sound engineering judgment, and collaborate effectively across disciplines.

NICE TO HAVE

  • Experience with functional safety (FuSa) principles and standards, such as ISO 13849.
  • Experience with EMC-conscious design, pre-compliance testing, and applicable regulatory standards such as UL 1740, UL 61010, or FCC Part 15.
  • Familiarity with servo drives, motor-control power interfaces, and industrial communication protocols such as EtherCAT.
  • Experience integrating battery systems, battery management systems (BMS), and charging infrastructure.
  • Experience troubleshooting and supporting complex electromechanical systems at manufacturing or customer sites.

As published by Dexterity. Applications are handled on their site.

Skills this posting mentions

Field ServiceVehiclesPCBA

About Dexterity

We deliver full-stack robot dexterity solutions for logistics, warehousing, and supply chain operations. Our robots pick, move, pack, and collaborate with human-like skill in existing infrastructure to solve the toughest problems in material handling.

All 14 openings at Dexterity

One click, then it is written

Apply to Dexterity with a resume written for this role.

Queue Sr. Electrical Engineer - Robotics Hardware and I read the posting, rewrite your resume against it, draft the cover letter, and score the fit. Then you press send, or press one button and I fill in Dexterity’s form for you.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • 25 sent a week, free
  • No card
  • Nothing sent until you say so

More roles at Dexterity

See all

Similar roles elsewhere

See more

Put this to work

Paste your career in once. Every application after that is written for you.

Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • New matches ranked and written before you are up.
  • Every bullet stays inside what your history supports. Nothing invented.
  • Queued, submitted, interviewing, offer: one screen, not a spreadsheet.

Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.

Listed from the job board Dexterity publishes. Refolk is not the employer and does not handle their hiring. Applications go to Dexterity directly.

Hiring at Dexterity? Post this role to the Refolk talent pool for $299, once. No commission, refunded if I find nobody. Post a role for $299