Electrical Manufacturing Engineer, Supplier Operations (Medical Device)
Cala Health · Watertown, SD
- Location
- Watertown, SD
- Level
- Mid level
- Posted
- 17 November
About this role
About Cala
At Cala, we’re working to free people from the burden of chronic disease. We began by creating the first non-invasive prescription therapy for hand tremor. After years of careful fine-tuning and improvements, we recently released kIQ® Plus, our most sophisticated therapy yet. Our products have empowered thousands of people to get back to their lives with confidence and ease.
But we won’t stop there. Our pioneering technology can be applied across neurology, cardiology, and beyond. It’s all part of our mission to help people in their struggle with chronic disease. We’re only just getting started
The Opportunity
We are seeking a hands-on Electrical Manufacturing Engineer to serve as Cala’s on-site technical lead at our contract manufacturer in Watertown, South Dakota. This role focuses on keeping production running smoothly, resolving test failures, improving test and manufacturing processes, and driving yield improvement for our wearable medical devices.
You will be on the floor at our contract manufacturer during production builds, spending much of your time on site. You will get ahead of issues before they stop the line, relay build status and escalations to the team at HQ, and partner with the contract manufacturer to build the process maturity and quality controls needed to qualify them as a full dock-to-stock supplier, eliminating the need for incoming testing at HQ.
A Day in the Life
- Production Support: Be on site at the contract manufacturer during production builds, understanding day-to-day production issues first-hand, as well as supporting process improvements and line optimization.
- Line Readiness: Get ahead of anything that could stop a build, including component supply and shortages, build paperwork (work instructions, travelers, and device history records), equipment and fixture readiness, and operator training. Drive issues to resolution with the contract manufacturer and Cala teams.
- Test Failure Root Cause Analysis: Lead root-cause investigations across electrical, mechanical, software, and process issues; verify corrective actions and feed manufacturability, assembly, and test results back into the design. Partner with Cala’s electrical, mechanical, and firmware engineers to close out issues and implement corrective actions.
- Test Improvement: Improve production test coverage, fixtures, and methods to catch defects earlier, reduce false failures, and shorten test time. Support test method validation and related documentation.
- Automated Data Collection: Develop a robust software platform that models and tracks the manufacturing process, tracks tests on the line, and ensures the quality and performance of each and every product produced.
- Process & Yield Improvement: Develop and improve manufacturing and test processes to increase yield, reduce cycle time, lower scrap, and rely less on operator tribal knowledge. Identify opportunities for automation or semi-automation.
- Process Validation & Documentation: Assist with process validation (IQ/OQ/PQ) and partner with the contract manufacturer to document and roll out new tooling, processes, and work instructions. Support NPI and production ramp activities, including design transfer.
- Quality Compliance: Support the identification, documentation, and resolution of quality issues within Cala’s and the contract manufacturer’s quality systems, including NCMRs, CAPAs, and engineering change orders (ECOs).
- Dock-to-Stock: Work with the contract manufacturer to establish the process controls, test confidence, and quality data needed to qualify them as a full dock-to-stock supplier, eliminating incoming testing at HQ.
- HQ Liaison: Serve as HQ’s eyes and ears at the contract manufacturer. Provide regular build status, yield data, and early escalation of risks to Cala’s Operations, Quality, and Engineering teams.
Skills and Experience
We are looking for an Electrical Manufacturing Engineer to support production at our contract manufacturer in a dynamic, fast-paced startup environment, exemplified by:
- Manufacturing & Test Experience: 5+ years in manufacturing, test, or manufacturing engineering for electronic or electromechanical products (medical device preferred). Experience with test instrumentation, data acquisition, and scripting or programming, such as Python, to develop or improve production test systems.
- Electrical Troubleshooting: Hands-on board- and system-level debugging. Comfortable reading schematics and layouts and using oscilloscopes, DMMs, power supplies, and electronic loads to isolate failures. Working knowledge of PCBA processes (SMT, reflow, rework) and common defect modes.
- Production Test: Experience with functional and end-of-line test, ICT or flying probe, and the design or improvement of test fixtures and test software.
- Firmware & Mechanical Breadth: Comfortable loading and troubleshooting firmware, interpreting test logs, and diagnosing mechanical issues in small electromechanical assemblies (plastics, bonding, sealing). Scripting experience (e.g., Python) for test automation or data analysis a plus.
- Contract Manufacturing: Experience working directly with contract manufacturers, ideally as the on-site representative of the product owner.
- Medical Device Quality: Familiarity with medical device design and quality controls in a regulated environment (ISO 13485, FDA QMSR / 21 CFR 820), including NCMRs, CAPAs, process validation (IQ/OQ/PQ), and change control. Familiarity with IEC 60601-1 a plus.
- Process Improvement: Experience applying root cause analysis tools (8D, 5 Whys, fishbone), PFMEA, SPC, and DOE to improve yield and process stability. Lean or Six Sigma training a plus.
- Ownership & Communication: Strong problem-solving skills and comfort working on the factory floor. Self-directed and able to operate independently away from HQ. Clear communicator who works well across engineering, quality, operations, and supplier teams.
- Education: BS or MS in Electrical Engineering or a related technical field.
Location and Travel Expectations
- Location: Living in or near Watertown, SD is strongly preferred. Candidates based in the Minneapolis, MN area or near Cala’s headquarters in San Mateo, CA will also be considered.
- On-site Requirement: Ready availability and frequent on site presence at our contract manufacturer in Watertown, SD during production builds.
- Travel: Candidates based outside Watertown should expect regular, recurring travel to Watertown to meet the on-site requirement. Occasional travel to Cala HQ in San Mateo, CA may also be required.
- Variability: On-site time may increase temporarily during critical build phases, production ramps, or issue resolution periods.
- Why On-site: On-site presence is essential to observe manufacturing firsthand, collaborate with operators and manufacturing teams, and resolve issues before they impact production.
Applicants must be authorized to work in the United States on a full-time basis, or eligible for work authorization through a sponsorship path that Cala Health is able to support. Sponsorship decisions are made individually based on role, timeline, and cost considerations, and are not guaranteed.
Cala Health believes our success is based on diversity of people, teams and thinking. We offer all employees the tools, training and mentoring they need to succeed. Our selection process is driven by the key requirements for the role rather than bias or discrimination on the basis of a candidate’s sex, gender identity, age, marital status, veteran status, non-jobrelated disability/handicap or medical condition, family status, sexual orientation, religion, color, ethnicity, race or any other legally protected classification.
As published by Cala Health. Applications are handled on their site.
Skills this posting mentions
About Cala Health
Cala Health is a bioelectronic medicine company transforming the standard of care for chronic disease. The company’s wearable neuromodulation therapies merge innovations in neuroscience and technology to deliver individualized peripheral nerve stimulation. The first indication for Cala Health’s wearable therapy is essential tremor, a disease experienced by more than seven million people and characterized by severe hand tremors. New therapies are under development in neurology, cardiology, and psychiatry. The company is headquartered in the San Francisco Bay Area and backed by leading investors in both healthcare and technology.
All 12 openings at Cala HealthOne click, then it is written
Apply to Cala Health with a resume written for this role.
Queue Electrical Manufacturing Engineer, Supplier Operations (Medical Device) and I read the posting, rewrite your resume against it, draft the cover letter, and score the fit. Then you press send, or press one button and I fill in Cala Health’s form for you.
01Drop your resume
A PDF or a LinkedIn URL. About a minute, once.
02I rank the openings
Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.
03Each one is written up
Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.
- 25 sent a week, free
- No card
- Nothing sent until you say so
More roles at Cala Health
See all- 20 November
- 20 November
- 5 November
- 5 November
- 23 October
- 12 October
Similar roles elsewhere
See more- 27 October
Director / Senior Director, Biometrics & Data Science
Seismic TherapeuticWatertown, MA
$220k - $300k/yrDirectorEngineering - 27 August
Principal Information System Engineer
Treeline BiosciencesWatertown, Massachusetts
$180k - $197k/yrPrincipalEngineering
Put this to work
Paste your career in once. Every application after that is written for you.
Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.
01Drop your resume
A PDF or a LinkedIn URL. About a minute, once.
02I rank the openings
Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.
03Each one is written up
Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.
- New matches ranked and written before you are up.
- Every bullet stays inside what your history supports. Nothing invented.
- Queued, submitted, interviewing, offer: one screen, not a spreadsheet.
Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.
Listed from the job board Cala Health publishes. Refolk is not the employer and does not handle their hiring. Applications go to Cala Health directly.
Hiring at Cala Health? Post this role to the Refolk talent pool for $299, once. No commission, refunded if I find nobody. Post a role for $299