Refolk
FrameworkReading the market

The Civil Service List Reach Score, Six Dimensions to Sit, Route, or Skip

Pull a title's certification and list records, score six dimensions, and record a dated Sit, Route, or Skip call that a second reader would grade the same way.

23 min readLast reviewed November 18, 2026Read as Markdown

Key takeaways

  • Reach depth is the highest list number certified across every certification for a prior exam number, divided by the total eligibles on that list, and because no jurisdiction publishes a benchmark for it, every ratio needs a pull date.
  • Under New York's Section 65, provisionals are capped at nine months and must be terminated within two months of a new list being established, so provisional-replacement certifications mark appointments an agency is forced to make.
  • California lists typically run 12 months against a typical four years in New York City, so a 130-day local hiring cycle uses about 36% of a California list but only about 9% of an NYC one.
  • Price the exam path at 186 to 250 days before a first day of work at the earliest: 90 to 120 days of New York State scoring plus 96 days of state or 130 days of local hiring, per NEOGOV's 2019 data.
  • In California, promotional lists are used before open lists and veterans' preference places veterans at Rank 1 regardless of score, so an outside switcher's effective rank sits below all of them.
  • In Refolk's index, 4,616 US profiles are Civil Engineers in Government Administration against 5,653 in the Civil Engineering industry, but federal employers dominate the government count, so filter by City or County names before sizing a state or local pool.

This guide is for one decision that comes up again and again. A state, city, or county exam announcement is open, and you have to decide whether sitting the exam will realistically get you hired before the resulting list expires. It is written for people moving over from private-sector work who would otherwise sit every exam and then wait for years. It takes the public list and certification records for a title and turns them into six scores, a fixed decision rule, and a dated Sit, Route, or Skip call.

What does the Sit, Route, or Skip call decide?

For one posted title, the call decides whether you sit the exam (Sit), enter the title through a route that doesn't require the exam (Route), or drop the title (Skip). Passing is not the real question. The real question is whether the list you would land on is likely to be used deeply enough, for long enough, and at a pay rate you can live with while you wait.

Terms used throughout:

  • Competitive class: civil service positions that are filled from a ranked list produced by a competitive exam.
  • Eligible list: the ranked list of people who passed an exam. Agencies hire from it until it expires or a newer list replaces it.
  • List number: your position on that list. In New York City's data this is the list_no field.
  • Certification: the step where the civil service agency sends a hiring agency names from the list, in rank order.
  • Rule of three: the hiring agency must choose from among the top three ranked eligibles who are willing to accept the job.
  • Canvass: the agency's check on which certified eligibles are still interested. In New York, canvass responses are valid for 90 days.
  • Provisional appointment: a non-permanent hire into a competitive title, made when no usable list exists.
  • Anniversary date: the date a list is scheduled to expire.

How an exam turns into a hire

  1. Exam
    You sit an announced title; the announcement sets list-life and extension terms
  2. Scoring
    90 to 120 days in New York State before any list exists
  3. List established
    Ranked by score, credits, and preference; anniversary date set
  4. Certification
    An agency requests names; eligibles are sent in rank order
  5. Canvass and pick
    Interest is checked and the rule of three applies
  6. Appointment
    Hire, if it happens before the list expires or is superseded
Each stage between sitting the exam and starting work uses up time, and the list's life keeps counting down through all of them.

Most explainers stop once they have described the rule of three. For a switcher, the useful question is "will my civil service list number be reached", and that gets answered from records. You need to know where certifications stopped on the last comparable list, how long the next list will live, and who gets certified before you do. New York City publishes those records in the most usable form, so most of the method below is built on them. Where other places publish less, I say so.

Which public records show how far a list has been reached?

New York City publishes certification-level records on NYC Open Data, and those records show directly how far down each list agencies have reached. New York State lists are on ELMS Online. California's exam bulletins and glossary on CalCareers set out list order and list life.

RecordWhat it gives youCoverage
Civil Service List CertificationList number, number certified, vacancies approved, provisional flag, hiring salaryNYC
Civil Service List (Active)Live lists with Anniversary DateNYC
Civil ListPayroll by title codeNYC
ELMS OnlineStatewide lists and location choicesNY State
StateJobsNYNY HELPS and other state postingsNY State
CalCareersBulletins, list order, list lifeCalifornia

The certification dataset holds 6.74 million rows across 21 columns, with one row per certified candidate. Those rows include the candidate's placement on the list, the number of eligibles certified to the agency, the number of vacancies the agency is approved to fill, and a flag that shows whether the certification replaces a provisional employee. The Active file adds the Anniversary Date. A file that size is something you filter, not something you read.

Per-title pull recipe (NYC Open Data)
Pull date: ________   Title: ________   Title code: ________
Prior exam numbers (exam_no): ________, ________, ________

A. Civil Service List Certification, filter exam_no = each prior exam number
   A1. Max list_no across ALL rows, all agencies, all certs = ____
   A2. Row counts by group_no:  00 = ____   01 = ____
   A3. Rows with provisional_replacement set, grouped by quarter = ____
   A4. Hiring salary shown for the title = ____
   A5. Number certified vs vacancies approved, latest three certs = ____

B. Civil Service List (Active), filter exam_no = same prior exam number
   B1. Total eligibles (row count) = ____   (if not found, write TOTAL NOT FOUND)
   B2. Anniversary Date = ____

C. Civil List, filter title code
   C1. Pay of current incumbents in the title = ____

Reach depth = A1 / B1 = ____

Run each filter in the dataset's filter view or an exported spreadsheet; repeat block A for every prior exam number found in step 1.

One limit applies to all of this. I did not verify a public dataset of terminated lists. If a prior list has already expired and no longer shows in the Active file, you may not be able to find its total eligibles. The rubric below covers that case.

How do you score the six dimensions?

Each dimension gets 0, 1, or 2 against fixed thresholds. Four of them (reach, life, provisional pressure, and compression) add up to an exam-path score out of 8. The other two (route and pay) act as gates in the decision rule. The thresholds are my own convention. No jurisdiction publishes a benchmark for how deep lists get reached, so what the thresholds buy you is consistency, not precision.

Dimension210
R: Reach depthRatio 0.50 or more0.20 to 0.49, or total not foundUnder 0.20
L: List life4 years, or extension to 4 allowed12 months or moreUnder 12 months usable
P: Provisional pressureFlags in half or more of quartersSome flags, or no per-title dataNo flags in an NYC title
C: CompressionNo push-down factorOne factorTwo or more
N: RouteOpen now and you qualifySeen before, or you miss a qualificationNone found
W: Pay and waitFloor met, funded to upper-end waitFloor met, funded to lower-end waitBelow floor, or unfunded

R: Prior-list reach depth

Reach depth = the highest list_no certified for a prior exam number ÷ the total eligibles on that list. It proves how far into a comparable list the agencies actually got, which is the best evidence you have of how far they will get into the next one. It lies in two ways. A single agency can certify deep only because it is canvassing past people who never responded, and a promotion list certified first can make the open list look busier than it was. Taking the maximum across all certifications fixes the first problem. The C dimension deals with the second.

After your own list is established, re-score R using your actual position. If your list number is at or below the prior list's maximum certified number, score R as 2, whatever the ratio says.

L: List life remaining

L measures how long the list you would land on can be used, and that window varies a great deal from one jurisdiction to the next.

JurisdictionTypicalMinMax
NY Statenot stated1 yr4 yr
NYC4 yr1 yr4 yr
California state12 monot stated48 mo
San Francisco (discrete)not stated6 mo24 mo (48 with extension)

The rules behind the table:

  • New York State (Section 56): list life is fixed at no less than one year and no more than four. A hiring freeze can extend a list by the length of the freeze. Once a list has existed for a year or more, it terminates when an appropriate new list is established. In practice the state schedules the old list to expire 30 days after the new one is established.
  • New York City: DCAS can extend a list up to four years, but only if the exam announcement says an extension may be made. Lists are typically kept for four years.
  • California: lists typically run 12 months and can be extended up to 48.
  • San Francisco: discrete lists run 6 to 24 months, with a 48-month maximum. Continuous lists run 6 to 12 months.

These differences add up. A 130-day local hiring cycle uses about 36% of a 12-month California list, but only about 9% of a four-year NYC list (both derived). If the title's prior exam numbers show it gets re-examined faster than its stated list life, drop L by one point, because a new list can end yours early. Courts can order special eligible lists, and restored candidates can be put on special lists, but those are remedies, not a plan.

P: Provisional-replacement pressure

A provisional-replacement certification is a list appointment the agency has to make, not one it can choose to skip. New York law caps provisional appointments at nine months, and a provisional must be terminated within two months after a new list is established. The cap is enforced in practice:

22,663
Provisional employees cut from NYC headcount between 2008 and the end of 2019 (derived)
DCAS took provisional headcount from 37,797 down to 15,134, which is why a provisional-replacement flag signals hires the agency actually has to make.

For NYC provisionals held beyond the time limits, the "substantial compliance" standard is 5% of competitive-class positions, so some overhang is tolerated. Count flagged certifications by quarter across the prior list's life. Only aggregate provisional counts are published, and I did not find a per-title count in open data outside the NYC certification flag. Where that per-title data doesn't exist, score P as 1 and label it "no per-title data". If you can see the data and there are no flags, that is real evidence of no forced demand, so score 0.

C: Rank compression from ties, credits, and promotion lists ahead

C counts the things that put people ahead of an outside candidate on top of their raw score. Count one point for each factor that applies:

  • A promotion list goes first. In NYC, candidates on a list with group number 01 may be considered before those on the primary list with 00. In California, promotional lists are used before open lists.
  • Absolute veterans' preference, and you are not a veteran. California's veterans' preference places the veteran at Rank 1 of the list, regardless of score.
  • Residency preference, and you are not a resident. Some jurisdictions, Cohoes among them, consider resident eligibles first.

New York's veterans' credits do not count as a separate factor. They add 10 points (disabled) or 5 on open exams and 5 or 2.5 on promotion exams, and those points are already reflected in the prior list ranks that R measures.

Ties work for you. Under the rule of three, every candidate tied at the third score can be reached. New Rochelle's worked example reads "One at 100, 12 at 95 (choice of all 13 candidates...)". When scores fall into coarse bands such as 5-point bands, large ties are built in rather than occasional. If the list shows banded scores, add one point back to C, up to a maximum of 2. One practitioner source says NYC orders tied scores by Social Security number digits. I could not verify that against a primary rule, so do not build on it.

California list order, used top down

  1. Sub-divisional promotional
    Used first
  2. Departmental promotional
    Used next
  3. Multi-departmental and service-wide promotional
    Used next
  4. Departmental open
    Used after all promotional lists
  5. Open
    Where outside candidates rank; veterans can sit at Rank 1 regardless of score
An outside switcher sits on the bottom layer, below every promotional list and below any veteran placed at Rank 1.

N: Non-exam route availability

N scores whether you can enter the title without waiting on a list at all. In New York State, NY HELPS requires no exam, but every candidate must meet the title's minimum qualifications. Conversion to competitive status is expected within one year of permanent appointment. The posted end date in my source was June 30, 2028, so re-check it on StateJobsNY. Continuous-recruitment lists in New York carry list numbers that begin with 00, 10, 20, or 30, which makes them easy to spot. I did not research exempt and non-competitive class rules outside NY HELPS. Score those 2 only when a live posting names the route, and check your jurisdiction's own rules otherwise.

Route postings screen on minimum qualifications, so how your private-sector history maps onto them decides the outcome. Refolk scores how well your history fits a specific posting and tailors your resume to it, so a gap in the minimum qualifications shows up before you apply, not after a screener rejects you.

W: Hire-rate pay against your floor, with the wait priced in

W compares the hiring salary in the certification records with your pay floor, after accounting for the wait before your first paycheck. The Civil List payroll file shows what current incumbents in the title are paid, which is a useful sense check on the hiring rate. The next section covers how to price the wait.

How long is the wait, and how do you price it against your floor?

Price the exam path at 186 to 250 days before your first day of work, at the earliest. That is 90 to 120 days of scoring in New York State plus 96 days of hiring for state titles or 130 for local ones. Treat that as a floor, not a forecast. The time you spend waiting to be reached on the list comes on top of it.

SectorDaysMultiple of private (derived)
Private361.0x
State962.7x
Public average1193.3x
Local1303.6x

The days come from NEOGOV's time-to-hire report, which uses 2019 data drawn from 8.2 million applicants and 999 agencies. These are averages, and individual agencies vary widely. California's Department of General Services cut its hiring steps from 89 to 14 and its time-to-hire from 179 days to 65. No published method exists for pricing the wait against a personal pay floor, so this one is derived:

  • Exam path, state title: 186 days (lower end) to 216 days (upper end).
  • Exam path, local title: 220 days to 250 days.
  • Route path: 96 days for state or 130 days for local, with no scoring wait.
  • Funded means you can stay in your current job, or your savings cover your floor, for that many days.
  • If R is 1, assume you won't be in the first certification, and treat the upper-end figure as your minimum.

Score W twice when a route exists, once for the exam path and once for the route path. Most employed switchers can fund any of these waits, so for them W mostly comes down to hiring salary against floor. W only starts to bite when you are between jobs.

Which call does the score produce?

Apply four rule lines in order and stop at the first one that matches. The exam-path score E is R + L + P + C, out of 8.

  1. Line A, Route: N is 2 and route-path W is at least 1. Enter through the route. Sit the exam as well only if E is 6 or more.
  2. Line B, Sit: E is 6 or more, neither R nor L is 0, and exam-path W is at least 1.
  3. Line C, marginal Sit: E is 4 or 5, neither R nor L is 0, and exam-path W is 2. Log it as marginal.
  4. Line D, Skip: everything else. If N is 1, add the title to a watch list.

Exam path strength against route availability

Route open nowNo route open
Route
Enter through the route now; do not sit
Route, sit as backstop
Enter now and sit for competitive standing
Skip
Drop the title; watch-list it if a route has appeared before
Sit
Sit the exam and re-score when your list number posts
Weak exam pathStrong exam path
An open route beats a strong exam path for getting in, while a strong exam path is still worth sitting as a backstop for competitive standing.

R and L each have a hard floor because together they decide whether there is any realistic path at all. A deep reach on a list that expires in eight months is worth no more than a long list nobody gets certified from. Sitting the exam as a backstop after Route is not redundant. NY HELPS appointees cannot be promoted until their position is covered-in to the competitive class.

An exam whose list will never reach you is not a long shot. It is a year of waiting with nothing at the end.

Step-by-step: scoring one exam announcement

The whole procedure takes about three and a half hours per title the first time and well under an hour for a re-score. On ordering: because a new exam can be held at any point in a list's life, step 1 checks for a pending exam before step 3 reads the anniversary date.

Score one announcement

  1. Identify the title and its prior lists
    Match the title code and exam numbers against the NYC Active and Certification datasets, or ELMS for New York State, and check for a pending newer exam in the same title. Done when the prior exam numbers are listed, in about 30 minutes.
  2. Compute reach depth
    Filter certifications by each prior exam number across all agencies and record the maximum list number certified and the total eligibles. Done when the ratio is written down with the pull date, in about an hour.
  3. Check list life remaining
    Read the Anniversary Date, whether the announcement allows extension, and the jurisdiction's minimum and maximum. Score L, dropping one point if the title is re-examined faster than its stated life.
  4. Count provisional-replacement pressure
    Count certifications with the provisional-replacement flag, grouped by quarter. Done when you have flagged quarters out of total quarters, in about 15 minutes.
  5. Apply rank compression
    Count promotion lists ahead, absolute veterans' preference, and residency preference, then credit coarse tie bands. Done when C is scored, in about 30 minutes.
  6. Check non-exam routes
    Search StateJobsNY for NY HELPS and continuous-recruitment postings in the title and check local rules for other routes. Done when N is scored against a live posting or marked none found.
  7. Price the wait against your floor
    Compare the hiring salary with your floor across 186 to 216 days for state titles or 220 to 250 for local ones. Score W for the exam path and, if a route exists, the route path.
  8. Record a dated Sit, Route, or Skip call
    Apply rule lines A to D in order and write the call, the line used, the pull date, and a re-check trigger. Done when a second reader holding the same pull would land on the same call.
Dated Sit, Route, or Skip record
Title / title code:
Jurisdiction:                 Exam number announced:
Data pull date:               Scored by:
Prior exam number(s) used:

R  Max list_no certified ____ / total eligibles ____ = ____            Score: _
L  Stated life ____ ; extension clause Y/N ; re-exam faster Y/N      Score: _
P  Quarters flagged ____ of ____ ; per-title data Y/N                Score: _
C  Promotion list Y/N ; CA veteran Rank 1 Y/N ; residency Y/N ;
   coarse tie bands Y/N                                              Score: _
N  NY HELPS / continuous (00,10,20,30) / other ____ ; meets MQs Y/N  Score: _
W  Hiring salary ____ vs floor ____ ; wait priced at ____ days ;
   funded through ____ days ; route-path W ____                      Score: _

E = R + L + P + C = __ / 8
Call: SIT / ROUTE / SKIP        Rule line: A / B / C / D
Re-check trigger and date:

One record per title per pull; keep the old records when you re-score so the trail shows what changed and why.

How does this score go wrong?

Most failures come from reading one record as if it were the whole picture. Each item below names the false signal, what it looks like, and the check that catches it.

  • Reach depth taken from one certification. One agency's certification looks deep because it canvassed past people who never responded. Check: aggregate across every certification for the exam number and use the maximum list number.
  • Ignoring group numbers. A high reach on the primary list hides a group 01 promotion list that was certified first. Check: read the group_no field before you trust R, and count the promotion list in C.
  • Treating the anniversary date as final. A New York State list more than a year old ends when a new list is established, and the old list expires about 30 days later. Check: look for a pending exam in the same title before you score L.
  • Reading the provisional flag as demand. Where a title carries a large number of provisionals, the statute lets termination stretch past two months, so one flag does not prove a quick appointment. Check: count flagged certifications per quarter, not just whether any exist.
  • Treating NY HELPS as risk-free. Appointees cannot be promoted until covered-in, and the program has a posted end date. The Commission has covered-in appointees by hire-date window, for example those hired between June 26, 2024 and June 11, 2025. Check: read whether the posting's appointment type is contingent permanent or permanent.
  • Reading statewide rank as reachable rank. A certified list contains only candidates who chose that geography, so your local rank is different from your statewide one. Check: compare your location choices with the certified list in ELMS.
  • Reading index counts as state and local supply. The Government Administration industry includes federal employers. Check: filter by "City of" or "County" in employer names.

Some limits come from the evidence itself. No jurisdiction publishes a reach-depth benchmark. I did not verify a terminated-lists dataset. Per-title provisional counts exist only through NYC's certification flag. Nobody has published how much ties, credits, and residency actually move reach across real lists. The NEOGOV waits are averages from 2019. When your score depends on one of these, write "unverified" next to it in the record, and re-check that item first when you re-score.

What does Refolk's index show about the pool you would join?

In Refolk's index of professional profiles, the government side of a field can be nearly as large as the private side. However, much of that government count is federal, so industry totals overstate the state and local peer pool.

Query (US)ProfilesEmployers seen near the top
Civil Engineer, Government Administration4,616USACE, USDA, US Army, City of Philadelphia, City of Seattle
Civil Engineer, Civil Engineering5,653AECOM, Michael Baker
Analyst, Government Administration, Entry Level9,686Treasury, IRS, DOJ, City of Long Beach, Boston EMS
0.82x
Size of the government Civil Engineer pool relative to the private-industry pool, in Refolk's index
4,616 Civil Engineers in Government Administration against 5,653 in the Civil Engineering industry, before removing federal employers.

For entry-level government analysts, federal employers outnumbered state and local ones 11 to 2 among the top employers. That employer read comes from a sample of only 25 profiles, so treat it as a direction, not a measurement. The same analyst query at Senior level returned 0. That is a gap in how seniority is tagged, not a sign that senior government analysts don't exist.

The table is most useful for spotting the people who have already made the move you're scoring. A civil engineer who went from AECOM to the City of Seattle shows you which titles that move runs through.

How do you keep the call current?

A call is valid only as of its pull date, so re-score whenever one of the inputs moves. A Skip or a watch-listed title can turn into a Sit or a Route within a quarter.

Re-score when any of these happens:

  • A new exam is announced in the title, or a new list is established.
  • Your own list number posts. Re-score R against it.
  • A NY HELPS or continuous-recruitment posting opens in the title.
  • The provisional flag starts showing up in the certification file.
  • A quarter passes on any title you've logged as watch-list or marginal Sit.

When a Route posting opens, or a canvass letter arrives from a certification, the application window is short. Refolk tailors your resume to that specific posting and drafts the cover letter, so you can respond the same week the record changes.

Before you log the call

  • Reach depth uses the maximum list number across every certification for the exam number, not one agency's.
  • The group_no field was checked and any group 01 promotion list is counted in C.
  • A pending exam in the same title was searched for before L was scored.
  • Provisional-replacement flags are counted per quarter, or P is labeled "no per-title data".
  • Any route counted in N is backed by a live posting whose minimum qualifications you meet.
  • W uses the hiring salary from the records and the 186 to 250 day exam-path wait.
  • The record carries a pull date, the rule line applied, and a re-check trigger.
  • Every score that rests on unverified evidence is marked "unverified".

Questions job seekers ask

Will my civil service list number be reached?

Compare your list number with the highest list number certified on the previous list for the same title, taken across every agency's certification rather than just one. If yours is at or below that number, reach is plausible. If it sits well past it, plan as if it won't be reached. In New York City, the certification file on NYC Open Data carries every certified list number, so you can answer this with a filter instead of guessing.

Is it worth taking the civil service exam if I work in the private sector now?

Only when the title's prior list was reached deep, the list you would land on lasts long enough, and the hiring salary clears your floor across a wait of about 186 to 250 days at the earliest. Score those against the public records before you register. If a no-exam route such as NY HELPS is open in the title, entering that way usually beats waiting on a list.

How far down the eligible list do they hire?

It depends on the title, and no jurisdiction publishes a standard figure, so you have to measure it. Divide the highest list number certified on a prior list by that list's total eligibles. Ties push reach further: under the rule of three, everyone tied at the third score can be chosen. In New Rochelle's worked example, that turns three candidates into 13.

Can a civil service eligible list be extended past its expiration date?

Yes, within limits that depend on the jurisdiction. New York State lists last one to four years and can be extended by the length of a hiring freeze. New York City can extend a list to four years, but only if the exam announcement said an extension may be made. California lists typically run 12 months and can be extended to 48. Separately, a New York State list over a year old can still end early when a new list is established.

Can I get a New York State government job without a civil service exam?

Yes, through NY HELPS. It requires no exam, but you must meet the title's minimum qualifications. Appointees are expected to convert to competitive status within one year of permanent appointment, and they cannot be promoted until their position is covered-in. The program's posted end date is June 30, 2028, so check StateJobsNY for its current status and the appointment type on each posting.

Does a provisional appointment in my title mean the list will be used?

Usually, in New York. Provisional appointments are capped at nine months, and a provisional must be terminated within two months after a new list is established, so agencies have to appoint from the list to replace them. The exception is a title with a large number of provisionals, where the statute lets termination take longer. Count flagged certifications per quarter rather than treating a single flag as proof.

Put this to work

Paste your career in once. Every application after that is written for you.

Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • New matches ranked and written before you are up.
  • Every bullet stays inside what your history supports. Nothing invented.
  • Queued, submitted, interviewing, offer: one screen, not a spreadsheet.

Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.

Read next