Refolk
9 min readMarkdown

25% of Managers Plan Contract Hires. Name the Client, Not Aerotek

One in four US hiring managers plan contract hires. How to list contract work on a resume: client first, agency in parentheses, short gigs under one header.

If you're looking for work right now, there's a good chance you'll be offered a contract, and a good chance you'll write it up in a way that reads as job-hopping. One in four US hiring managers planned to hire temporary or contract workers in fall 2026, up from 16% in spring 2025, according to Express Employment Professionals and The Harris Poll. In November, Fiserv cut contractors along with staff, Canva laid off 22% of its workforce, and Disney asked some managers to target 20% in annual cost savings.

Should you take a contract job right now?

Take a contract job if the client is a name you'd want on your resume and the work matches the role you're aiming for. Contract hiring has settled at a higher level than in 2025, and most hiring managers say contractors have at times outperformed full-time staff.

The numbers from the Express/Harris survey:

  • 25% of US hiring managers planned contract or temp hires in fall 2026, up from 16% in spring 2025.
  • The figure hit 26% in spring 2026 and then eased a little. So this is a plateau, not a surge.
  • 82% say their company has used contract workers, and 57% use them now.
  • Hiring managers estimate contractors do 11% of the work at US companies.
  • 84% say contractors have sometimes outperformed full-time employees.
  • 53% think contract work is a permanent shift. 47% think it's a temporary response to the economy.

One caveat: the "fall" edition was fielded online from May 13 to June 1, 2026, among 1,006 US hiring decision-makers. That was before this autumn's layoff run. Canada is a useful comparison: 22% of hiring managers there planned contract hires in fall 2026, roughly the same as in 2025 and 2024.

The layoffs matter for a second reason. TrueUp counts 206,429 tech layoffs so far in 2026, about 653 a day compared with 579 a day in 2025. Fiserv's cut of 3,000 jobs under CEO Takis Georgakopoulos included contractors, and Block began a second round after cutting more than 4,000 earlier in the year. Bob Funk Jr., CEO of Express Employment International, put the employer view plainly: "contract staffing is becoming an increasingly important part of that strategy." Companies bring contractors in quickly and drop them quickly, so a contract can solve this quarter's problem and leave you with a resume problem next year.

Why the staffing agency name hides your best experience

When you list the agency as your employer, the client's name drops out of the parts of your resume that people search and skim. A recruiter looking for "Bank of America" or "Meta" won't find you if your header says Aerotek.

A staffing agency is the firm that legally employs and pays you while you work at a client company. Recruiters often search their applicant tracking system (ATS) by target employer. When they do, the employer field is what gets matched, and on most contractor resumes that field holds the agency.

In Refolk's index of professional profiles, 2,614 US profiles hold Software Engineer, Data Analyst, Business Analyst or Data Engineer titles with a Staffing & Recruiting firm as the employer. The most common names are agencies: Mindlance, Robert Half, Allegis Global Solutions, Aerotek, Swift Strategic Solutions and Visionaire Partners. Only 113 US profiles use an explicit contract title such as "Contract Software Engineer." Their listed employers are mostly clients: Meta, Apple, Intel, Disney, Bank of America and EY.

~23x
US tech profiles naming the agency as employer vs. using an explicit contract title

2,614 agency-employer profiles against 113 contract-titled ones in Refolk's index; directional, since the scopes differ.

SegmentCountSource
US tech/analyst titles at staffing-agency employers2,614Refolk's index
US explicit "contract software engineer" titles113Refolk's index
UK explicit "contract software engineer" titles64Refolk's index
Agency-employer to explicit-contract ratio (US)~23xDerived
US to UK explicit-contract ratio1.8xDerived

The two US counts don't cover exactly the same ground, because the 2,614 includes analyst roles. Software Engineer made up 14 of 25 sampled profiles, which gives a rough engineer-only figure of about 1,460. That's still around 13 agency-named profiles for every one that names the client.

The cost isn't just in search. A screener who sees "Mindlance, 4 months" and then "Swift Strategic Solutions, 5 months" sees two vendors and two short stints. They don't see two engagements at a bank they've heard of. Two years on the Bank of America data platform turns into a list of agencies, and you don't come up when a recruiter searches for the bank.

How to list contract work on a resume

Put the client first and the agency in parentheses, then group consecutive engagements under one dated header. That gives screeners the brand they recognize and keeps the employment record accurate.

The format has five parts:

  1. Client name first, agency in parentheses. For example: "Bank of America (via Aerotek)." The employer search hits the client, and the agency that actually paid you is still on the record.
  2. A contract label in the title. Use "Contract Data Engineer," not plain "Data Engineer." This matches the pattern the 113 contract-titled profiles already use, and it explains the short dates before anyone asks.
  3. One dated header for back-to-back gigs. Put consecutive contracts under a single span so the timeline shows continuous work.
  4. A scope line for each engagement. Name the team, the system and one measurable result.
  5. An end reason, plus a conversion line if it happened. "Program ended," "contract concluded" or "converted to full-time" answers the question a screener is about to ask.

One long engagement

If you spent 14 months at one client through one agency, treat it like any other job:

Contract Software Engineer, Bank of America (via Aerotek) | Mar 2024 - May 2025 Payments platform team. Rebuilt the reconciliation service; cut nightly batch runtime from [X] to [Y]. Contract concluded at program end.

Back-to-back gigs, grouped

This is where most resumes go wrong. Before:

Mindlance | Software Engineer | Jan 2024 - Apr 2024 Robert Half | Software Engineer | May 2024 - Sep 2024 Aerotek | Software Engineer | Oct 2024 - Feb 2025

After:

Contract Software Engineer | Jan 2024 - Feb 2025

  • Intel (via Mindlance), Jan-Apr 2024: test automation for [team]; [result].
  • EY (via Robert Half), May-Sep 2024: data pipeline migration for [client group]; [result].
  • Disney (via Aerotek), Oct 2024-Feb 2025: API work for [product]; [result]. Program ended.

Both versions cover the same span. The first reads as three exits and the second reads as one continuous contract career. Rewriting your full history this way by hand is slow, and it's the work Refolk takes off you. I build the resume from your own history, put the client names first, and group engagements under dated headers so the timeline holds together.

Do multiple short contracts look like job-hopping?

Not when the resume shows them as contracts. Average tenure for temporary and contract employees is just under three months, according to the American Staffing Association, so four engagements in a year is a normal contract year.

Screeners read short stints as job-hopping when the resume gives them nothing else to go on. Job-hopping means leaving permanent roles quickly, and it suggests either restlessness or getting pushed out. Neither applies to a contract that ended on schedule. The grouped header and the "Contract" label reframe the dates before the screener draws a conclusion.

End notes matter more this year because contractors are often cut first. Fiserv's cuts hit contractors hard. Disney's 20% target can be met through "expense reductions," and that often means contractor spend. When a gig ends early, the usual cause is the client's budget, not your performance. A three-word note does the work:

  • "Program ended"
  • "Contract concluded"
  • "Budget cut; extended twice before"

Don't explain more than that. One line is enough to show the ending was routine. A paragraph makes it look like something you need to defend.

A contract that ended on schedule isn't a quit. Your resume just has to say so before the screener decides otherwise.

Contract-to-hire resume: why the conversion line can't carry it

Write every engagement so it stands up without a conversion, because roughly three in four staffing placements never convert. Contract-to-hire is a role that starts as a contract with the stated option of becoming a permanent position.

The American Staffing Association's 2014 survey found that 35% of staffing employees were offered a permanent job by a client, and 66% of those accepted. Multiply them and you get roughly 23% who actually converted. The data is old, so treat it as directional, but it's the best public figure available.

~23%
Share of staffing employees who converted to a permanent job with a client

35% offered times 66% accepted, from the ASA's 2014 survey.

If your resume relies on a "converted to FTE" line to prove you were good, that plan fails about three times out of four. The scope line has to make the case instead:

  • Team: who you worked with ("payments platform," "growth analytics")
  • System: what you touched ("data warehouse migration," "checkout API")
  • Result: what changed, with a number if you have one

If you did convert, show it as a promotion inside the same entry: "Contract Data Analyst, Mar-Aug 2025; converted to Data Analyst, Sep 2025-present." That reads as the client choosing you, and few lines on a resume carry more weight.

Consultancy or client: which name goes first?

Name the client first when the client is the brand the reader will recognize. Name the consultancy first when the consultancy is the brand and you worked for it as an employee across several clients.

Refolk's index shows 64 UK profiles with explicit contract software engineer titles, at employers including Equal Experts, Citi, Ofsted and the UK Atomic Energy Authority. The US has 1.8x as many, but the naming question is the same in both countries. Equal Experts is a consultancy. If it employed you and placed you at three clients, list it as the employer and put the clients in your bullets. Ofsted or Citi under a body-shop agency is the opposite case: the client is the signal, so it goes first.

A quick way to decide:

Your situationHeader leads withAgency/firm appears as
Agency placed you at one clientClient"(via Agency)"
Several agencies, back-to-back clients"Contract [Title]" + date spanPer-line parentheses
Consultancy employee across clientsConsultancyClients named in bullets
Converted to full-time at clientClientNoted on the contract period only

Whichever you choose, keep it consistent between your resume, your online profiles and the application form. When the employer field says Aerotek and the resume says Intel, a careful screener will notice and wonder why.

FAQ

Should I put the staffing agency or the client name on my resume?

Both, client first. Write "Client (via Agency)" so recruiters searching by employer find the recognizable name, and the agency that paid you is still on the record. In Refolk's index, profiles that label their work as contract mostly show client names like Meta, Apple and Bank of America.

How do I list multiple short contracts without looking like a job-hopper?

Put consecutive contracts under one header such as "Contract Software Engineer, 2024 - 2026," then give each engagement its own line with client, agency, dates and a scope line. Average contract tenure is just under three months, so the grouped format shows a normal contract pattern instead of a string of quits.

Should I take a contract job if I'm hoping for full-time?

Take it if the client and the work move you toward the role you want, but don't count on converting. Roughly 23% of staffing employees converted in the ASA's 2014 data. Plan for the engagement to stand on its own resume line, and keep applying for permanent roles while you're on it.

The data behind this

Put this to work

Paste your career in once. Every application after that is written for you.

Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • New matches ranked and written before you are up.
  • Every bullet stays inside what your history supports. Nothing invented.
  • Queued, submitted, interviewing, offer: one screen, not a spreadsheet.

Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.

Keep reading