Refolk
10 min readMarkdown

Fiserv Cut 3,000 Roles. Put the Client, Not Just the Agency, on Your Resume

Fiserv cut 3,000 employee and contractor roles. How to list agency and contract work on a resume so recruiter searches and ATS parsers see the client.

On its Nov 3 earnings call, Fiserv said it has cut 3,000 employee and contractor roles since June, and it won't say how many of them were contractors. If you were one of them, or one of the 10,900 temp help jobs the BLS says disappeared in September, your next role will probably be another contract. How you format your agency work decides whether a screener sees one solid run of experience or a pile of short gigs under a staffing firm they've never heard of.

What Fiserv's cuts tell laid-off contractors

Fiserv's cuts, along with a falling temp help count, mean a lot of agency-placed workers are job hunting at the same time, and the likeliest way back in is another contract or contract-to-hire role. That makes the way you present agency assignments the resume fix that matters most right now.

Here are Fiserv's numbers:

  • New CEO, new math. Takis Georgakopoulos, a former McKinsey partner, became CEO on June 14, 2026. By the Nov 3 call the workforce was down 3,000 and senior management was down more than 10%.
  • Bigger savings target. Project Elevate's savings goal doubled from $500M to $1B. Activist investor Jana Partners had pushed for $1.25B.
  • Fewer products. Fiserv plans to exit more than a dozen non-core products.
  • AI aimed at contractor work. The company says it's using AI to automate fraud reviews, customer service and software development. That last one points straight at engineering contractor work.
  • No split disclosed. Fiserv had more than 38,000 employees as of Dec 31, 2025. It hasn't said how many of the 3,000 were contractors.

The wider market is moving the same way. BLS preliminary data shows temp help services falling from 2,497,700 to 2,486,800 jobs in September. That's still about 15,200 above September 2025. The sources disagree on how long the growth streak ran before the drop: SHRM says eight straight months, and KORE1 says the October revisions cut it to six. Noah Yosif, chief economist at the American Staffing Association, called the drop a sign of "the fragility of the industry's ongoing recovery." Total payrolls grew only 29,000 in September. The temp penetration rate (temp jobs as a share of all US jobs) was 1.56%.

Then there's what's actually getting filled. Contract-to-hire is a role that starts as an agency contract and can convert to full-time if the client keeps you. In IT, it now matches direct hire.

35%
Share of Q1 2026 IT placements that were contract-to-hire

KORE1 puts direct hire at about 35% and pure contract at 30%, so contract-to-hire now ties direct hire.

Why does the agency name hide your best keyword?

Recruiters search the company field for names they recognize. A line that only says "TEKsystems" or "Insight Global" will never match a search for the client where you actually did the work. Add the client's name and a search has two company names to match on.

A Boolean search is a recruiter query built with AND, OR and quotes, such as "software engineer" AND "Fiserv". That query runs against the employer names on your resume or profile. If your fourteen months of payments work sits under "Aerotek," the search skips you. The skills match, but the company string doesn't.

The human reader has the same problem. A hiring manager at a bank who sees "Robert Half, 14 months" learns nothing about you. If they see "Fiserv," they can guess the regulatory environment, the transaction volumes and probably the stack. The client's name tells them all that without you writing it out.

The staffing firm signed your paycheck. The client is the experience you're selling.

How do most agency workers label their contract work?

Vaguely, going by Refolk's index of professional profiles. Only 765 US profiles use an explicit contract title, while 4,678 US profiles sit under staffing and recruiting employers with contractor or consultant titles, and the most common of those titles is plain "Consultant."

4,678
US profiles with contractor or consultant titles at staffing firms

In Refolk's index, about 6x the number of profiles that use an explicit contract title.

These numbers aren't a population estimate, since the index doesn't cover all 2.49 million US temp help jobs. What they do show is how people write this work up. The common habit seems to be putting the agency in the company field and something vague in the title. The resume ends up not saying where the work happened or what it was.

SegmentCountNote
US, explicit contract titles765Refolk's index
India, same titles182US is 4.2x India
US contractor/consultant titles at staffing firms4,678Refolk's index
Staffing-firm vs explicit contract titles~6.1xDirectional; filters differ
"Contract Software Engineer" in US sample14 of 25 (56%)25-profile sample
"Consultant" in staffing-firm sample7 of 25 (28%)25-profile sample

The gap tells you something. Workers who write "Contract Software Engineer" are already describing the job. Workers listed as "Consultant" at a staffing firm leave out both the client and the job. One profile in the India sample gets it right: "SDET (Contract), Hims & Hers / BayOne Solutions." That line gives the role, the arrangement, the client and the agency, and all four can be searched.

Why does the parser make you look like a job hopper?

Most ATS parsers treat every company-title-dates line as a separate job. Five short assignments become five jobs with a few months of tenure each. Put one agency umbrella on top with the clients nested underneath, and the parser reads it as one long stint.

An ATS parser is the part of an applicant tracking system that reads your resume and fills in structured fields: employer, title, start date, end date. It doesn't know a staffing firm placed you anywhere. It just sees lines with dates. Tenure gets calculated from those fields, and some recruiter filters sort on it.

Here's the same 26 months written two ways.

Before (parses as four jobs):

  • Data Analyst | Insight Global | Sep 2024 to Dec 2024
  • Data Analyst | Insight Global | Jan 2025 to Jul 2025
  • Business Analyst | Insight Global | Aug 2025 to Feb 2026
  • Data Analyst | Insight Global | Mar 2026 to Oct 2026

After (parses as one job):

  • Contract Data Analyst | Insight Global | Sep 2024 to Oct 2026
    • Client: regional bank (4 months). Rebuilt the chargeback reporting pipeline...
    • Client: payments processor (7 months). Owned fraud-review dashboards...
    • Client: card issuer (7 months, Business Analyst). ...
    • Client: payments processor (8 months). ...

Writing short contract assignments this way is about structure, not spin. The work really was continuous. The first version just doesn't show it.

Client first or agency first? Pick by assignment length

Lead with the client when you had one long assignment at a name people recognize. Use the agency as an umbrella when you had several short ones. Either way, name the agency somewhere on the line, because employment verification calls the employer of record.

The employer of record is the company that legally employed you and paid you, which for agency work is usually the staffing firm. Resume guides split on this. Some say the employer of record always goes in the company field. Others say lead with the client. Both are partly right, so here's the rule I'd follow:

Your situationCompany lineWhy
One long assignment, known clientFiserv (via TEKsystems)Client name matches searches
Several short assignments, one agencyRobert Half, clients nested belowParses as one continuous job
Same client, multiple agencies over timeClient, agencies listed per date rangeShows tenure at the client
Converted to full-timeClient, two date rangesConversion is the headline

A few rules apply to every format:

  1. Put "(Contract)" in the title. It's honest, it shows up in searches, and it explains the arrangement before anyone asks.
  2. Never write "Employee, Fiserv." "Via" or a slash makes the arrangement clear. Background checks will hit the agency, so the agency has to be on the page.
  3. Use the client's name in your bullets. "Migrated Fiserv merchant settlement jobs to..." does more work than "Migrated client settlement jobs."
  4. Check your NDA. If your contract bars naming the client, describe it ("top-10 US payments processor") and lead with the agency.

Deciding which format each entry gets is tedious, and it's work Refolk handles for you. Refolk writes your resume from your own history with client and agency in the right fields and the arrangement stated in the title.

How to write contract-to-hire on a resume

If you converted, show one entry at the client with two date ranges, contract first and then full-time. If you didn't convert, list it as a contract assignment and say so plainly. A conversion is the strongest signal a contract resume can carry.

A converted entry looks like this:

  • Software Engineer | Fiserv | Jun 2024 to Oct 2026
    • Full-time, Dec 2024 to Oct 2026
    • Contract via TEKsystems, Jun 2024 to Dec 2024

That entry shows the client chose to hire you after watching you work. Conversion windows usually run 90 days to six months, which is exactly why your contract-to-hire resume has to get through the contract screen first. Nobody converts a contractor they never brought on.

Pricing matters here too. In SIA's May 2026 Pulse survey, a net 24% of staffing firms reported rising bill rates, up from a net -2% in January, even though volume was flat. When clients pay more per contractor, expect them to be pickier about fit. For a resume, that means leading with the client whose domain matches the posting. A bank's contract role should open with your bank or processor work, not with the logistics assignment from three years ago.

That reordering has to happen for every application, and it's easy to get wrong when you're sending ten a day. Refolk tailors your resume to each posting you paste in, drafts the cover letter, and scores how well you actually fit, so you can skip the contract roles where your client history doesn't line up.

Where are the contract roles if they aren't posted?

Go to the agencies directly instead of waiting for listings. One recruiting firm, reading two months of temp declines, argues that contractors are being let go without announcements and that much of the replacement work isn't posted publicly. That's one firm's read rather than a measured fact, but the advice holds either way.

  • Call your last agency recruiter first. They already have your paperwork and your rate history.
  • Contact the big desks directly. TEKsystems, Robert Half, Aerotek, Insight Global, Russell Tobin and Volt are the agency names that turn up on resumes again and again.
  • Send the client-first version of your resume. If an agency recruiter searches their database for a client name, that's the version that matches.
  • Name your target clients. "I've worked inside two payments processors" gets you matched to the right requisitions faster than "open to anything."

The hard part of a laid-off contractor's job search is that the public channel may be the weakest one. You can send fifty applications to posted roles and hear nothing while contract openings get filled through agency desks and referrals you never saw. And if you're still on an assignment that's winding down, you can't exactly announce on your profile that you're looking.

Whichever channel you use, the resume does the same job. It has to show continuous, client-named experience in fields a parser reads correctly and a recruiter's search can find.

FAQ

Is it dishonest to put the client's name before the staffing agency?

No, as long as the agency also appears and the title says "(Contract)." Writing "Software Engineer (Contract), Fiserv (via TEKsystems)" states exactly what happened: you did the work at Fiserv and TEKsystems employed you. It would be dishonest to leave the agency off or call yourself a Fiserv employee. Employment verification calls the employer of record, so that version gets caught anyway.

Should "Consultant" be my job title if that's what the agency called me?

Change it to describe the work. In Refolk's index, plain "Consultant" was the most common title among staffing-firm contractors (7 of a 25-profile sample), and it tells a recruiter nothing. Use the functional title you held on the client team, such as "Contract Data Analyst" or "QA Engineer (Contract)," because that's the string recruiters type into searches.

Does a contract-to-hire role that didn't convert hurt my resume?

Not if you write it as a contract assignment with real outcomes. Conversions fall through for budget reasons that have nothing to do with you, and Fiserv's Project Elevate, a cost program that cut contractors along with employees, is a public example of how that happens. List it as a contract, lead with what you shipped, and leave the conversion question for the interview, where one sentence about the client's budget covers it.

The data behind this

Put this to work

Paste your career in once. Every application after that is written for you.

Drop a resume or a LinkedIn URL. I rank the live openings against it, rewrite the resume and write a cover letter for the best of them, and fill in the employer's form when you press the button. You read, you decide what goes out.

  1. 01Drop your resume

    A PDF or a LinkedIn URL. About a minute, once.

  2. 02I rank the openings

    Every weekday morning, the live catalog scored against your history. Up to 20 worth your time, not two hundred links.

  3. 03Each one is written up

    Resume rewritten for the posting, a cover letter, a fit score. Press send, or let me fill in the form.

  • New matches ranked and written before you are up.
  • Every bullet stays inside what your history supports. Nothing invented.
  • Queued, submitted, interviewing, offer: one screen, not a spreadsheet.

Free, no card. Up to 25 applications sent a week, and nothing is sent until you say so.

Keep reading